Install & Care

Install & Care

Before installing

  • Clean and dry the door frame where the adhesive strip will sit.
  • Check that the screen overlaps the frame enough for a good seal.
  • Test the adhesive on delicate paint or older trim before full installation.

Installation

  1. Lay the screen flat and find the top edge and magnetic center opening.
  2. Attach the top section first, keeping the center opening aligned.
  3. Press the side strips onto the frame from top to bottom.
  4. Walk through once and make sure the magnets close cleanly.
  5. Adjust the sides if the center opening pulls too tight or gaps at the bottom.

Care

  • Use a soft cloth or handheld vacuum to remove dust.
  • Do not machine wash.
  • Remove gently at the end of the season and store folded in a dry place.